Sun Microsystems HP LTO4 Using VOP, Version Document Files Posted File Size, Customer, Service

Using VOP

Using VOP

There are two versions of VOP: 1) Customer and 2) Service.

Refer to the VOP documentation for information about how to download and install these applications. TABLE 3-1is an example of these versions.

TABLE 3-1VOP Versions, Files, Documents, and Download Sites

Version	Document	Files	Posted	File Size
Customer	96179	VOP_CUST_REL_1.0.12.zip	05/28/2008 21:30	6055192
		General_Instructions_Download	05/28/2008 21:42	47104
		Document.txt	05/28/2008 21:56	173
Download Site:		https://spe.sun.com/spx/control/Home
Service	96180	VOP_SVC_REL_1.0.12.zip	05/28/2008 22:12	7006234
		General_Instructions_Download	05/28/2008 22:24	47104
		Document.txt	05/28/2008 22:44	173
Download Site:		http://dlrequest.sfbay.sun.com:88/

For the initial configuration, use a secure point-to-point connection and the default IP address 10.0.0.1. Because all tape drives use the same default IP address, connecting them to a switch for the initial configuration will cause problems; unless you power the drives on and configure them one-by-one.

To use VOP for LTO4 tape drives, you need to launch a special file:

■Windows: Launch the batch file (ltoVOP.bat)

■Solaris/Linux: Launch the ltoVOP file (above the batch file)

FIGURE 3-2VOP Files and LTO Batch File

➪

316196601 • Revision: A Chapter 3 Virtual Operator Panel 19