HP LCS60 manual Enter the lcsadm interface Add the PPP service

LCS60 Configuration and Connection for PPP Service

4. Enter the lcsadm interface.

5. Add the PPP service:

Enter protocol from Config> or config protocol from Top>.

Add tcpip. Add atalk and ipx as required.

Add ppp.

6. Define the PPP service sessions (maxsessions):

From the Config directory, enter max, or enter config maxsessions at the Top directory.

Assign the number of sessions. The total number of sessions through the LCS60 is 120 when PPP is configured.

7. Set up IP network security groups (ipas). Enter ipas at the Top>Config># prompt or config ipas at Top> and follow the on-screen instructions for configuring IP network security groups for the various workgroups required. Refer to Screen 4-1 for an example. (Refer also to the Multiple IP Subnetworks section of Chapter 1.)

Screen 4-1: Configure IP Network Security Group – Example

Top>Config># ipas

CAUTION: Please refer to the I&A Guide for instructions about configuring this feature.

IP ADDRESS CONFIGURATION MANAGEMENT FOR SLIP AND PPP SERVICES

1Configure/Display IP Network Security Groups

2Configure/Display Reserved IP Addresses

Enter Menu Selection

[ ? for help, q to quit, RETURN for menu ] ==> 1

IP NETWORK SECURITY GROUP MANAGEMENT FOR SLIP AND PPP SERVICES

1Add an IP Network Security Group

2Delete an IP Network Security Group

PPP

Screen 4-1: continued on next page

Issue 3 4-3