PPP Service Examples

Screen F-2: Continued

(pause, 2000) (comment, {})

(comment, {Send \r to get DESTINATION prompt}) (send, {})

(pause, 1000) (comment, {})

(comment, {Send dialstring for morse}) (send, {mlkway/earth/morse.ppp}(cr){}) (pause, 4000)

(comment, {})

(comment, {Switch the packet driver from character mode to packet mode.})

(comment, {}) (changemode, packet) (comment, {})

(comment, {Send a request to open the LCP layer})

(comment, {Pause to confirm that the lcp and ipcp layers are open.})

(comment, {}) (poll, lcp, open) (poll, ipcp, open)

Note: The above dialup script uses the script language slang. WIN PC/TCP can also use a script language comscrpt; for additional information contact Apple Computer Co.

PPP Connection

After completing the client configuration procedures described above, establish the PPP connection as described in this section.

Note: Enter information in the fields shown on the screens; example entries are shown in the figures.

From the PC/TCP Main menu shown on the left in Figure F-3, select Dialer. This will display the Dialer screen shown on the right in Figure F-3.

Information User

Issue 3

F-11