HP LCS60 ppp, slip, arap, name, value, asytcp, tcpasy, subnet, session, session, address, address, parameter, parameter, mask bits, IP Network, maxsessions

		Glossary
DNS Resolver (dns)
domain	The domain this machine and its name server(s) belong to.
nameserver	The nameserver is identified by its internet address using dotted
	decimal notation. Multiple servers may be defined in your confi-
	guration file; they will be accessed in the order listed until a con-
	nection to a server is made.
Define Service Sessions (maxsessions)
session	This parameter defines the session type: async-to-TCP (asytcp),
parameter	TCP-to-async (tcpasy), PPP (ppp), SLIP (slip), and ARAP (arap).
	maxsessions defines the maximum number of supported LCS60
	sessions for all services.
session	The number of sessions you want to configure for a specific ser-
parameter	vice. Maximum values: maxsessions (180 for a single protocol or
value	500 for gateway service or, if other protocols are running, the
	maximum value is 120), asytcp, tcpasy (500 or 120 if other proto-
	cols are running), slip, ppp, arap (120).

SLIP/PPP Service (ipas/ipx)

IP Network	A name (1– 8 characters) for the workgroup in which the
Security Group	user will be assigned an IP address.
name
Internet network	Enter the IP network address for the Network Security
address	Group.
subnet	The system will ask if the the IP network address for the
	Network security group is divided in to subnets. If y, it will
	prompt for the number of mask bits.
mask bits	Enter the number of mask bits. Refer to the section Subnet
	Configuration (subnet) later in this Glossary.
internet host	Enter the IP host address allocated for the user ID within the
address	Network Security Group selected.

Glossary

Issue 3 G-5