HP LCS60 manual Initsetup

Initial Setup

Caution: You have super-user permission and could inadvertently change/delete any and all files, therefore, it is important that you follow these steps verbatim.

Step 5 Assign a password to root by using the passwd root command. The password must contain at least six characters. Only the first eight characters are significant; longer passwords can be used but the additional characters are ignored.

Step 6 Enter the LCSADM system administration interface by entering lcsadm at the root prompt.

Figure 3-2: initsetup

LCS60 Software

initsetup	new installation or reinstallion
			assign a name to the LCS60
	nodename
				set date, timezone, and time
		datetime
					set software key to activate
			softwarekey
					LCS60 services

Caution: Only one system administrator at a time should be using lcsadm to configure the LCS60. Use the lcsadm interface for all system administration; do not attempt to adjust individual configuration database files in any other way. If you attempt to execute any of the configuration commands while another administrator is executing Config commands, the following message will be displayed:

3-4 Issue 3