HP LCS60 Len, CRC, MRU, State, Alloc, Note:, Sesid, State, Max Term, Recv(Pkts), Max Config, Timeout Secs, Receive Errors, Show PPP – Link, IP, IPX, AppleTalk

Glossary

Recv(Pkts) Number of packets received.

Receive Errors

Len Indicates the length of the PPP frame received was not valid.

CRC Indicates a checksum error for the PPP frame received.

State Indicates that the state of the PPP frame received was invalid for HDLC framing.

Alloc Indicates that the system was unable to allocate a buffer for the received frame.

Show PPP – Link, IP, IPX, AppleTalk

Top>Session> show ppp link, ip, ipx, atalk

Note: Many of the report fields refer to features that are configured on the PPP host with the particular PPP package you are using. Refer to the documentation for your particular PPP package for details.

Sesid	Session ID number.
State	The state of the session (opened, closed, init, starting, etc.).
Max Config	The number of times the LCS60 will try to configure a connec-
	tion before quitting.
Max Term	The number of times the LCS60 will try to terminate the link to
	the PPP host gracefully before dropping the connection.
Timeout Secs	The number of seconds the LCS60 will wait for a response to a
	configure or terminate request from the peer before timing out.

SSide of the PPP link (p peer or l local).

MRU	Maximum receive unit (refer to the documentation for the PPP
	package you are using).

Glossary

Issue 3 G-11