HP LCS60 manual == morse

Initial Setup

Top># config
Top>Config>#	Return
Commands may be abbreviated. Commands are:
addhost	addnet	atalkas	backup	console
datetime	delhost	delnet	dftroute	dns
etherif	help	initsetup	ipas	ipx
manager/	maxsessions	nodename	ports/	protocol
quit	service/	session/	snmp	softwarekey
srvports	srvsetup	subnet	top/	upgrade
viewhosts	viewnets	^	!

Top>Config># init

LCS60 Software

Step 10 Enter init (at Top>Config>) to start the initsetup routine.

Step 11 Follow the menus in the initsetup; they will guide you through the essential items that must be configured for basic LCS60 operation (as shown in Figure 3-2). A sample initsetup session is presented on the following screen.

Top>Config># init

LCS60 Initial Setup and Configuration Procedure

The "initsetup" procedure leads you through the steps to initially set up this LCS60 by entering the node name, time and date, and the software key.

***This step allows the LCS60 Administrator to set the node name.

***This is the name by which other hosts know this LCS60.

The LCS60 is currently called "sysV68".

==> Do you want to change it? [y, n, ?, q] y

Enter the new node name for this LCS60 [? for help, q to quit]

==> morse

***This step allows the LCS60 Administrator to set the timezone, date, and

***time of the LCS60 system clock.

Current time and time zone is: 13:33 EST

==> Change the time zone? [y, n, ?, q] n

Current date and time: Mon. 08/17/95 13:33

==> Change the date and time? [y, n, ?, q] n

3-6 Issue 3