HP LCS60 manual Site Preparation, Controls and Indicators, Controls Location Switch Function

Introduction

Hardware

Table 2-1: Controls and Indicators
_____________________________________________________________________
⎜			Controls			⎜
_						⎜
⎜	Location	⎜	Switch	⎜	Function
⎜						⎜
		⎜		⎜
⎜ Rear Panel			Power		Power ON/OFF	⎜
		⎜		⎜
⎜		⎜	SYSTEM RESET	⎜ Processor and VME bus reset		⎜
_						⎜
⎜		⎜		⎜
⎜ MVME197			ABORT		Aborts program, returns to debugger	⎜
		⎜		⎜
⎜		⎜	RESET	⎜ Processor and VME bus reset		⎜
_						⎜
⎜			Indicators
⎜						⎜
⎜	Board	⎜	Indicator	⎜	Function	⎜
⎜		⎜	FAIL	⎜	Hardware failure	⎜
⎜ MVME197		⎜		⎜		⎜
⎜		⎜	SCON	⎜ Indicates 197 board		⎜
⎜		⎜		⎜	is VME bus controller	⎜
⎜		⎜	RUN	⎜	Processor run state	⎜
⎜		⎜		⎜		⎜
⎜		⎜	LAN	⎜ LAN status		⎜
⎜		⎜	VME	⎜	VME status	⎜
⎜		⎜		⎜		⎜
⎜		⎜	SCSI	⎜ SCSI status		⎜
⎜ MVME712M		⎜	ETHERNET XCVR	⎜	Ethernet Transceiver	⎜
⎜		⎜	PWR STATUS*	⎜	power status (amber)	⎜
⎜		⎜		⎜		⎜
			SCSI TERM
⎜		⎜		⎜ SCSI terminator		⎜
⎜		⎜	PWR STATUS*	⎜	power status (green)	⎜

*Can be seen by means of the rear panel cutout labeled SCSI INTERFACE.

Site Preparation

LCS60 specifications for the power, interface, and operating requirements, as well as the other pertinent interface specifications, are listed in Table 2-2.

2-2 Issue 3