HP LCS60 manual Administrative and Maintenance Commands

Configuration Changes

Note 2: The addhost and viewhosts commands display only the hosts configured in the local system database. If DNS is used on your system the nslookup command can be used to display host information.

Administrative and Maintenance Commands

In addition to the commands described in the previous sections, the following administrative/maintenance commands are also available from the Config direc- tory. Refer to the chapter listed in Table 3-3 for details of these commands.

Table 3-3: Administrative/Maintenance Commands – Config Directory
____________________________________________________
⎜	⎜	Command	⎜	Description			⎜
_Operation	⎜		⎜				⎜
⎜
⎜ Enable/disable autobaud	⎜	console	⎜	see Chapter	8		⎜
⎜ Backup/restore functions	⎜ backup		⎜ see Chapter		8	⎜
⎜ Remote upgrade	⎜ upgrade		⎜ see Chapter		9	⎜

LCS60 Software

Issue 3 3-29