HP LCS60 ser, show, vice type, show [service-type], statistics for all services, Typical Administrative Tasks later in this chapter

lcsadm Interface

Description This command is used to change the log level of each protocol server for a service. The higher the number given for the log level, the more detailed the log file. Valid log levels are:

arap	3, 6,		9	ppp	3, 6, 9, 10
slip	3, 6			asytcp	3, 6, 20
atmgr	3,	9		tcpasy	3, 6, 20
lcm	3,	6,	20

Default is shown in bold italic typeface.

Use the atlog command to set/display the atmgr log level.

Use the Manager directory log command to set/display the lcm log level.

Administration

Name	show
Synopsis	show [service-type]
Description	This command gives information about the specified ser-
	vice type. Entering show without arguments will display
	statistics for all services.
Example	An example of the show command is given in the section
	Typical Administrative Tasks later in this chapter.

Name types

Synopsis types

Description The types command lists the available service types.

Config Directory Commands

The Config directory (Screen 8-7) provides access to the configuration commands (see Chapter 3) as well as a variety of administrative and maintenance com- mands.

8-16 Issue 3