HP LCS60 Name, Name, Name, show, show, show, Name, flush, flush, disable, summary, summary, Synopsis, Synopsis, Synopsis, Synopsis, Description, Description

lcsadm Interface

Name	disable or enable
Synopsis	disable port# [port#2 ...]
Description These commands are used with a port number to
	temporarily disable a particular port from service or
	temporarily enable a particular port. These commands
	require root permission. More than one port number can
	be specified on the command line.
Name	flush
Synopsis	flush [port# ...]

Description This command resets TCP service port statistics for the individual ports. This command requires root permission.

Name	show
Synopsis	show [-c[v]][-w filename] [port#, ...]
Description	The show command gives TCP service port statistics about
	port state, service type, port resets. Output can be written
	to a file (filename) using the -woption. Port statistics can be
	shown individually by specifying a port number (port#).
	The -coption displays configuration statistics including
	service type, nohup, 2way, SID status, and PDDs. The -v
	flag gives a verbose output.
	Entering show without arguments will display statistics
	for all ports.
Name	summary
Synopsis	summary
Description	This command summarizes the service port information
	including number of ports configured and in use.

Administration

Issue 3 8-11