Configuration of the StarKeeper II NMS

8. The next field is optional. At Location enter the location of the LCS60 entered in Step 5 (e.g., room number) followed by a Return or just enter

Return .

9. At Time zone enter the applicable time zone for the LCS60 entered in Step 5 followed by a Return (refer to the StarKeeper II NMS documentation for format details).

10. The next field is optional. At Comment enter a comment (or nothing) and press Ctrl-g .

11

. At Console press

Return .

 

 

12

. At Alarms enter y

Ctrl-tto indicate that the LCS60 uses an Alarms-type

 

connection.

 

 

 

13

. At Status enter a

followed by

Return

if you are ready for StarKeeper

 

II NMS to begin monitoring this LCS60.

 

 

If you are not ready for StarKeeper II NMS to begin monitoring this

 

LCS60 (for example, you are populating the database in anticipation of

 

deploying an LCS60), enter i Return .

 

14

. At Method enter

h followed by

Return

to indicate that StarKeeper II

NMS should use its host fiber interface to monitor the LCS60.

15. At Dial string enter the area/exchange/name of the LCS60 entered in Step 5 followed by a carriage return (e.g., mlkway/earth/morse Return ), that is, the data switch call address that StarKeeper II NMS should use to monitor the LCS60.

16

. At Password enter Return to use the default password.

17

. At Host Number select the StarKeeper II NMS host interface number that

 

should be used to monitor the LCS60. Enter 0 Return .

18. At StarKeeper II NMS name field, if the field is not already populated, enter the name of the StarKeeper II NMS that will monitor this LCS60 and then enter Ctrl-g .

The StarKeeper II NMS should confirm the entry of the LCS60 with Alarms connection has been added.

19. Press Delete (6386) or Break (HP) three times to exit the menu sys- tem. At the CONFIRM EXIT prompt, enter Return to return to the main selection menu.

NMS II StarKeeper

Issue 3

B-5