HP LCS60 manual Subnetwork Configuration subnet

		Glossary
Enable, 8-bit	This prompt will be displayed for telnet ports only; enter y to
character	allow the administrator to configure the service port with 8-bit
mode	character mode enabled. The default (n) is 7-bit character mode.
inactivity	Enter the time in minutes in which the session will terminate if
timeout	there is no input or output. The default is n which is a two
	minute wait.
PDD	To associate a call address with this TCP-to-async port, enter a
	PDD in the form area/exchange/local address (e.g.,
	mlkway/earth/yard) or local address (e.g., yard).
port number	Enter the number of the port you wish to configure.
security	Enter nac if your system uses a Lucent Technologies Network
server type	Access Control System (NAC) R4.0 to provide security service.
	Enter other if this service is provided by a non-Lucent Technolo-
	gies security server.
service type	Enter the type of service being configured: telnet, directory,
	socket.
TCP win-	The allowed values for the TCP window size are: 512, 1024, 2048,
dow size	4096, 8192, and 16384; the default is 1024. Generally, choose a
	small window size for telnet connections, and a larger window
	size for file transfers.
Wait for	Enter the time in minutes in which the connection attempt will
input	be dropped if no input is received. The default is a two minute
timeout	wait.

Subnetwork Configuration (subnet)

address	Subnetwork addresses are specified in Interface dotted notation.
	For example, 154.12.26 is a subnetwork of Class B network
	address 154.12.
host	If you know a host on the subnetwork, you can enter h. The host
	address entered in the next prompt will be used to calculate the
	subnet address.
host address	The address of the host on this subnet. The subnet address will
	be calculated from this host address.

Glossary

Issue 3 G-7