HP LCS60 manual Report Fields, Session Directory, Show Arap, Sesid Session ID number

Glossary

interface	Specify the internet address for the network named in the previ-
address	ous prompt.
mask bits	The subnetwork mask identifies the subnetwork field of a net-
	work address. The length of the subnetwork field is chosen by
	specifying the number of subnetwork bits that will be used to
	formulate the network mask for a subnetted network. Enter
	only the number of bits in the host portion of the IP address.
	The default number is set to zero. The number of bits specified
	represents contiguous bits.
network	Specify the name of the network (up to 31 characters) to which
name	this subnetwork is connected (e.g., dock-net). Network names
	may contain letters, numbers, dashes, and underscores.
subnetwork	Identifies the subnetwork. Subnetwork names cannot be more
name	than 31 characters. They may contain letters, numbers, dashes,
	and underscores.

Report Fields

The following report fields are found in the LCS60 reports generated by the status commands (e.g, show, trace, etc.). The report fields are listed according to the directory in which they are generated.

Session Directory

Show ARAP

Top>Session> show arap

Glossary

Sesid Session ID number.

Xmit(Bytes) Number of bytes transmitted.

G-8 Issue 3