Reload System Software

LCS60 Application Software Installation

To install the LCS60 Application:

1. Be sure the /var file system has enough space (approximately 60,000 blocks required); then:

2. Insert the LCS60 Application tape (tape 3 of 3) in the tape drive and conduct the dialogue (as root; from the Console login) shown in Screen 9-4.

Note: Package installation will be aborted if the inet package has not been removed (use pkginfo -l inet to check for the package) or, if a version of the LCS60 package is already installed (use pkginfo -l lcs60 and pkginfo -l lcs60p to check for the LCS60 package and patch, respectively).

Error: information for "inet" was not found

indicates that the inet package has already been removed.

Note: In the pkgadd -d /dev/rmt/ctape1command, the last character is a one not the letter L; similarly, in pkginfo -l, the character is a one.

Screen 9-4: LCS60 Application Software Installation

#pkgadd -d /dev/rmt/ctape1

Insert a cartridge tape into Cartridge Tape Drive. Type [go] when ready,

or [q] to quit: go

Installation in progress.

The following packages are available:

1 lcs60 LCS60 Network Interface (m88k) R3.0 Bldxx

Select package(s) you wish to process (or 'all' to process

all packages). (default: all) [?,??,q]: Return

Maintenance

Issue 3

9-9