HP LCS60 manual Screen 5-1 Configure IP Network Security Group Example

LCS60 Configuration and Connection for SLIP Service

Assign the number of sessions. The total number of sessions through the LCS60 is 120 when SLIP is configured.

5. Set up IP network security groups (ipas):

Enter ipas at the Top>Config># prompt or enter config ipas from the Top directory.

Follow the on-screen instructions for configuring IP network security groups for the various workgroups required. Refer to Screen 5-1 for an example. (Refer to the Multiple IP Subnetworks section of Chapter 1 for further information.)

Note: Do not use the IP addresses shown in the examples as they should follow your corporate IP address convention.

Screen 5-1: Configure IP Network Security Group – Example

Top>Config># ipas

CAUTION: Please refer to the I&A Guide for instructions about configuring this feature.

IP ADDRESS CONFIGURATION MANAGEMENT FOR SLIP AND PPP SERVICES

1Configure/Display IP Network Security Groups

2Configure/Display Reserved IP Addresses

Enter Menu Selection

[ ? for help, q to quit, RETURN for menu ] ==> 1

IP NETWORK SECURITY GROUP MANAGEMENT FOR SLIP AND PPP SERVICES

1Add an IP Network Security Group

2Delete an IP Network Security Group

3Edit an IP Network Security Group

4Display all IP Network Security Groups

Enter Menu Selection

[ ? for help, q to quit, RETURN for menu ] ==> 1

Enter an IP Network Security Group name [q to quit, ? for help]

Screen 5-1: continued on next page

SLIP

Issue 3 5-3