StarKeeper II NMS

Configuration of the StarKeeper II NMS

b.Choose SYSADM ; this displays the Sysadm menu

c.Choose SHUTSK; select y to continue with shutdown. Enter Return when you see the shutdown completed message.

d. Exit the SKsh program by pressing Return and then y at the Exit the Menu Program? prompt.

3. At the SK: prompt, enter the su command with no arguments to change your user id to root.

4. Confirm that the StarKeeper II NMS Support for LCS60 for Ethernet package has not been previously installed on this StarKeeper II NMS. At the # prompt enter the /usr/bin/displaypkg command (6386) or the cat -s $INPUT/L60.name command (HP 720/730). If the output of the command entered does not contain a line that begins with: SK II NMS L60 Utility: R3.0 proceed to Step 5. If the command output does contain the above line then the StarKeeper II NMS Support for LCS60 for Ethernet package installed on this StarKeeper II NMS must be removed before the new package can be installed.

Note: If you have a version of the StarKeeper II NMS Support for LCS60 for Ethernet package currently installed you must remove it now.

To remove it:

a. Have on hand the diskette or tape that was originally used to install the current package.

b. Follow the appropriate instructions for your hardware:

For 6386

At the # prompt, enter the /usr/bin/removepkg

Hardware

command and respond to the prompts.

For HP

Insert the tape into the tape drive and wait until

Hardware

the light stops blinking. Then execute the follow-

 

ing four commands at the # prompt:

B-2

Issue 3