HP LCS60 manual User Information

PPP Service Examples

6. To set the IP address, under Configure, select TCP/IP (Figure F-7) and enter the IP address in "Local IP Address."

Note: If you are using a privately administered IP address, enter it in the Local IP Address field, otherwise the LCS60 will dynamically assign an IP address (if a negotiable IP address has been admin- istered in the client software package).

7. From the Main Screen, Figure F-8:

—Enter the phone number or the dialstring.

—Under File, select Save As to save the setup to a file name (for example, lcs60). This will allow you to launch lcs60 the next time you want to establish the PPP connection, rather than repeating this procedure.

8. Select Connect from the main screen (Figure F-8) to make the connection.

Note: The status will be displayed on the right side of the main screen as shown in Figure F-8.

9. To check AppleTalk status, select AppleTalk under Configure. This will display a screen similar to that shown in Figure F-9.

Note: For additional status, under Status select:

—Status for overall status of the connection

—Activity Log to see log entries of the connection.

User Information

Issue 3 F-15