HP LCS60 manual Destination mlkway/earth/morse.slip..-uhartnell

LCS60 Configuration and Connection for SLIP Service

DESTINATION: area/exch/60name.slip..-uuserid

This specifies the full address of your LCS60 including the userid entered when the address was reserved. For example, for a userid hartnell on the LCS60 morse:

DESTINATION: mlkway/earth/morse.slip..-uhartnell

To obtain a privately administered (static) address that has not been reserved by the LCS60, use a dialstring similiar to the following:

DESTINATION: mlkway/earth/morse.slip..154.12.23.11

This specifies the full address of the LCS60 and a specific IP address. The IP address specified in the above dialstring cannot be one of the IP addresses that has been reserved for other users or is in use.

SLIP

Dynamically Assigned IP Address

The LCS60 will assign a random IP address dynamically from the IP network range associated with the called IP Network Security Group. To do so, the ses- sion start up request must meet one of the following conditions:

The user has included the -Doption on his/her data switch dialstring and has a negotiable IP address administered in his/her client software pack- age.

The -Doption has been omitted from the dialstring and the user does not have a reserved IP address administered in the LCS60 configuration data- base.

For the user to always obtain a dynamic address from the PC, the dialstring is:

5-12 Issue 3