HP LCS60 manual Ethernet Interface etherif

Glossary

Glossary

zone The name of the virtual AppleTalk network. Although an

name AppleTalk zone name may contain any 8-bit character listed in Table D-1 of Inside AppleTalk, Second Edition, the only characters that may be entered as the zone name for the LCS60 virtual AppleTalk net- work are the printable 7-bit ASCII characters.

The valid characters are the SPACE character, all punctuation marks, digits, and upper-case and lower-case letters. SPACE characters that precede the first non-space character are ignored. All other SPACE characters are retained.

Invalid characters include all control characters, including the hor- izontal TAB, the DELETE character, and all 8-bit ASCII characters.

Ethernet Interface (etherif)

interface Specify the internet address. The interface must have a unique inter- address net address. All hosts sharing the same network must have identical network portions in the internet addresses. For example, 154.12.21.5

is a valid host address on network 154.12.21. The internet address for the interface always has four components.

interface You may specify the interface alias name (a name that can be used in

alias place of the interface name). It can be any name, but is usually an abbreviation of the name. Separate each alias with blanks or tabs.

interface Specify a name for the interface to the LAN. For example the inter-

name face name is morse-e0for the LCS60 named morse. The interface name cannot be more than 31 characters. Interface names may con- tain letters, numbers, dashes, and underscores.

network You may specify the network's alias names (names that can be used

aliases in place of the official network name). Separate each alias with blanks or tabs.

network Specify the name of the network (up to 31 characters) to which this

name interface is connected (e.g., dock-net). Network names may contain letters, numbers, dashes, and underscores.

subnet- The system will ask if the network is subnetted and if so, prompt for ted net- subnet information, actually taking the user through the subnetwork

work configuration option prompts.

G-4 Issue 3