HP LCS60 manual Screen

LCS60 Configuration and Connection for ARAP Service

ARAP

Screen 6-1: Continued

VIRTUAL NETWORK ZONE NAME .. <Research Lab>

NOTE: Changes to the configuration of the LCS60 virtual AppleTalk network will not take effect until you:

-Enter the lcsadm command and then type 'start atalk' from the top command directory to start AppleTalk protocol.

CONFIGURE ADDRESS AND ZONE FOR APPLETALK VIRTUAL NETWORK

1 Configure Address and Zone Name

2 Display Address and Zone Name

3 Delete Address and Zone Name

Enter Menu Selection

[ Type q to quit or ? for help ] ==> q

Top>Config>#

The virtual AppleTalk network address and the zone name must be defined; they are used for the dynamic allocation of AppleTalk addresses for PPP and ARAP sessions.

Note: Do not use the AppleTalk address shown in the example; follow your corporate AppleTalk address convention.

6. From the Top directory, enter start all.

7. To complete ARAP configuration, you must configure the client side of the service. Refer to the documentation included with your client software; examples of some software packages are given in Appendix F.

To unconfigure ARAP service: stop the service using stop arap, enter maxsessions at the Top>Config># prompt, and choose option 2 to delete the service.

6-4 Issue 3