HP LCS60 max, uucp, Note:, tcpasy, asytcp, telnet, socket, srvports, directory, start tcpip, config srvports, config maxsessions

LCS60 Configuration and Connection for Gateway Service

From the Config directory, enter max, or enter config maxsessions at the Top directory.

Assign the number of sessions of each type for the gateway service: tcpasy and asytcp. The total number of sessions for all services is 120 if PPP, SLIP, or ARAP is configured. If these services are not configured, the total number of sessions is 500.

4. Configure TCP-to-asynchronous gateway service ports (srvports):

Note: Up to 500 TCP service ports can be configured if the LCS60 is used for gateway service only. The ports are identified by a number and can be customized with pre-defined destinations (PDDs), disconnect options, inactivity timers, and other options. For a complete description of all of the parameters, refer to the Glossary.

Enter srvports at the Top>Config># prompt or enter config srvports at the Top directory.

Select 2 (Add a service port).

Enter a number in the range 1024 – 65535.

Gateway

Assign a type of service to the port: telnet for remote terminal access, socket for 8-bit (raw) TCP data stream (e.g., uucp file transfer), or directory for LAN queries of the TCP service port database.

Follow the on-screen instructions for customizing each service port you are configuring. Help is available by typing ?. A sample session (illustrating each of the three service port types) is shown in Screen 7-1.

5. If TCP/IP has not been started enter start tcpip from the Top directory now.

Issue 3 7-3