Trace PPP, Trace Slip | HP LCS60 guide

Glossary

Trace PPP

Top>Session> trace ppp

Sesid	Session ID number.
Name	The name of the PPP session. This name will be the letter p
	followed by the data switch channel number.
Remote User	The symbolic name (or numeric equivalent if the -noption is
	used) of the remote user's IP address.
Chan	The data switch channel number used for the gateway.
Switch Address	The originating group information.
Trace SLIP

Top>Session> trace slip

Sesid	Session ID number.
Name	The name of the SLIP session. This name will be the letter s
	followed by the data switch channel number.
Local Address	The LCS60 IP address, displayed using the -voption.
Dest Address	The IP address of the user.
Remote User	The user ID of the remote user.
Chan	The data switch channel number used for the gateway.
Chan	The data switch channel number used for the gateway.
Switch Address	The originating group information.	Glossary
		Glossary

Issue 3

G-15

Image 409

HP LCS60 manual Trace PPP, Trace Slip

Contents

Issue 3 July Issue Table of Contents Hardware Installation PPP Configuration Administration General LCS60 Software ConfigurationLCS60 Configuration and Connection for PPP Service LAN Connections Arap Configuration Administration Slip Configuration AdministrationLCS60 Configuration and Connection for Slip Service LCS60 Configuration and Connection for Arap Service User Information Gateway Services Configuration AdministrationBasics Logging On Lcsadm Interface Maintenance StarKeeper II NMS Originating Group Security Software Installation Fujitsu or Seagate ST5660N Drive User Error MessagesReload System Software Unix System Software Installation Manual Pages Glossary User Information Index Index Figures Figure F-8 PPP Connection Screen Tables Table of Contents Xiv Issue Screens Page Overview Document Organization Reference DocumentationLAN Protocols IP Address Assignment by the LCS60 Hardware Features Remote Access ProtocolsMultiple IP Subnetworks Network Security Copy Protection Manual Pages Customer Assistance Table of Contents Issue Document Organization Reference Documentation Software InstallationMan Pages User Information Gateway References Apple References PPP References OverviewSlip Reference Other References Benefits Domain Name Server DNS Resolver LAN ProtocolsSimple Network Management Protocol Snmp Routing Information Protocol RIP AppleTalk ProtocolSupported Traps and MIBs LCS60 as an AppleTalk Router AppleTalk Network Number and Zone Assignment IPX Virtual Network Assignment IPX Protocol TCP/Async Gateway Service Remote Access Protocols Serial Line IP Slip TCP Service Ports Van Jacobson TCP/IP Header Compression Point-to-Point Protocol PPP Multiple IP Subnetworks AppleTalk Remote Access Protocol ArapIP Routing Compressed IPX Header Cipx IP Routing with the LCS60 Security Groups IP Address Assignment IP Address Assignment by the LCS60 Hardware FeaturesEnhanced Processor Fiber Interface Network Security Backup/Restore AdministrationCopy Protection Remote Upgrade R3.0 UpgradeCentralized Network Management Online Manual Pages Manual Pages Customer Assistance Where command is the name of the command Installing the LCS60 AssemblyIntroduction Site Preparation Power and Grounding Configuration of the Lucent Technologies Data Switch LCS60LAN Connections Ethernet Lists the LCS60 controls and indicators Controls and IndicatorsIntroduction Controls Location Switch Function Controls and IndicatorsIndicators Board Indicator Function Specifications Cabling Space Requirements Required Equipment EMI ConsiderationsRequired Additional Equipment Installing the LCS60 AssemblyUnpacking Rack Mounting Hardware Table-Top Mounting Wall Mounting System Console and Port Configuration Connecting the System ConsoleSerial Port Optioning DTE/DCE 9600 bps Baud Rate ⎜ Flow Control MVME712M Module Optioning Non-Default Optioning RS-232 Interface Direct Connection to the LCS60 Connection through a Data Switch CC0 enter group Screen 2-1 TY Configuration DialogueCC0 enter ty Module Address Screen Screen 2-2 MSM Configuration Dialogue CC0 enter msm CC0 restore msm Asynchronous Terminal Data Switch Connection through StarKeeper II NMS Connection through Modems System Console Connections through StarKeeper II NMS Routing the Optical Fiber Cable Connecting the Fiber Interface Installing the CPM-HS Module and Optical Fiber Cable LCS60 Define the Local Address for the LCS60 Dialogues Enter Group Name Name of the LCS60 Level Enter local Type Enter mnemonicMorse Service state Configure the CPM-HS ModuleAddress Directory entry Power-Up Procedures Power and Grounding LCS60 Rear Panel AC Connections Reboot Power-Down ProceduresVerify LCS60 Console Connection Etc/shutdown -g0 -y Verify Fiber Connection Configure the LCS60 as directed in Chapters 3 through Configure the LCS60LAN Connections Ethernet LAN Connections Starting the LCS60 Base Level Backup Table of Contents Example Network Preliminary Hardware Requirements LCS60 Software Preliminary Configuration Requirements Specific Services Initial SetupStep Initsetup Screen 3-1 LCS60 Top Directory == morse LCS60 ID Software KEY Configuration Parameters LCS60 Software ⎜ Service Command Protocol and Services Commands Srvsetup Configure Protocols and Gateway Services srvsetup PROTOCOL/SERVICES to be Started When Booting Configure Protocols and Gateway Services srvsetup == tcpasy LCS60 and Service Session Parameter Configuration Menu == asytcp LCS60 Software LCS60 Software LCS60 Software Reserved IP Addresses for Slip and PPP Services LCS60 Software TCP/IP Ethernet Interface Configuration Menu Configure Address and Zone for Appletalk Virtual NetworkVirtual Network Number Virtual Node Number Virtual Network Zone Name == m-net0 == morse-e0 Ethernet Configuration Parameters IPX Configuration Management== ethernet Virtual PPP Configuration Parameters Configure Default Route, DNS, and Snmp Default Route Functions Default Route dftrouteNEW Domain Name Server dns Domain Name System DNS Configuration Snmp Manager snmp Simple Network Management Protocol Snmp Configuration Starting the LCS60 Base Level Backup Configuration Commands Config Directory Configuration Changes Administrative/Maintenance Commands Config Directory Administrative and Maintenance Commands Administrative and Maintenance Commands LCS60 Configuration and Connection For PPP Service Administration Table of Contents Issue Shows an example network using PPP service LCS60 Configuration and Connection for PPP Service Configuring PPP Service for IP, IPX, and AppleTalk Enter protocol from Config or config protocol from Top Enter the lcsadm interface Add the PPP serviceScreen 4-1 Configure IP Network Security Group Example Screen Screen 4-2 Configure Reserved IP Address Example PPP Screen 4-3 Configure IPX Parameters Example Screen Virtual PPP Configuration Parameters Screen 4-4 Configure AppleTalk Virtual Network Example == Research Lab Screen 4-5 Configure the Ethernet Interface Example PPP Service Connection Dialstrings PPP Privately Administered Static IP Address Reserved IP Address Destination mlkway/earth/morse.ppp..-uhartnell Dynamically Assigned IP Address Show Session Examples Following screen shows how to checkFor example All Peer Call Trace ExampleTopSession# show ppp 1.1 ip Log File Related Commands# pg /usr/adm/lcs/ppp.log PPP LCS60 Configuration and Connection For Slip Service Table of Contents Issue Shows an example network using Slip service LCS60 Configuration and Connection for Slip Service Configuring Slip Service Screen 5-1 Configure IP Network Security Group Example == Library Screen 5-2 Configure Reserved IP Address Example Techs Quit Screen 5-3 Configure the Ethernet Interface Example == m-net0 Header Compression in Chapter Slip Service Connection Dialstrings IP address is requested. This is not required when a NAC is Privately Administered IP AddressIdentifies the user either user name or numeric ID for whom Used Reserved IP Address Destination mlkway/earth/morse.slip..154.12.23.11 Destination mlkway/earth/morse.slip..-uhartnell Stop Example Following screen shows an example of the stop slip commandDestination mlkway/earth/morse.slip For Slip connection errors, refer to Appendix C ErrorsTop# stop slip # trace slip # pg /usr/adm/lcs/slip.log ∙ ping ∙ netstat Slip Arap Service Connection Dialstring LCS60 Configuration and Connection For Arap Service Table of Contents Issue Shows an example network using Arap service LCS60 Configuration and Connection for Arap Service Configuring Arap Service Virtual Node Number Screen 6-1 Configure AppleTalk Virtual Network Example Screen Show Service Example Arap Service Connection DialstringDestination mlkway/earth/brown.arap Top session Show Session ExampleCRC # pg /usr/adm/lcs/arap.log ∙ atping ∙ atnetstat ∙ atlog Arap Service Ports Trace TCP/Async Error Messages Log Files Gateway Services Table of Contents Issue Shows an example network using gateway services LCS60 Configuration and Connection for Gateway Service Gateway Enter a number in the range 1024 TCP-TO-ASYNCHRONOUS Gateway Service Configuration Menu Screen 7-1 Gateway Service Configuration Example== telnet SID NohupPress Return to continue == == directory == wimsey == socket Disabled Telnet Service Access to Gateway Services Dialstrings Hosts daytime TCP service, the user would specify port Inactivity Timeout OptionPort An example is shown in the following screen User Information Are accessed by the telnet and/or socket serviceReturn to Destination Option Destination earth/brown.telnet Telnet open Async-to-TCP Gateway Service Destination earth/brown.telnet..moon TCP-to-Async Gateway Service Data Switch to LCS60 to LAN Uucp Feature$ telnet brown For tcpsock would be # lcsadm Top # config srvports LAN to LCS60 to Data Switch Example Uucp Service Using SunOS Usr/etc/rfsaddr -h 60name Example Uucp Service Using NCR Following screens show a variety of port commands Service PortsTopPorts disable Trace TCP/Async Error MessagesFollowing screen shows a typical trace Conn Log Files Gateway Services Log Files⎜ Log File Information Directory System Console Remote Administration Typical Administrative TasksBasics Logging On Lcsadm Interface Network Access Password Option Backup and Restore OperationsStatus Error Messages Logging On Basics System Console Remote AdministrationEdit the file lcsadm Delete the # sign from the line # cd /etc/opt/dk/srvtab # dkcu mlkway/earth/morse.lcsadm Lcsadm Interface# lcsadm This command exits the lcsadm interface Common CommandsHelp Need information e.g., help start Top Directory Commands Initial System Setup initsetupScreen 8-1 Top Directory Top# manager Stop ? ⎪ dkhost ⎪ ipx ⎪ tcpip ⎪ atalk ⎪ slip ⎪ ppp ⎪ snmp ⎪ Routed ⎪ asytcp ⎪ tcpasy ⎪ arap ⎪ all Start/stop Command Dependencies Session Directory Commands Screen 8-2 Session Directory Following commands are available from the Session directory TopSession# show ppp 1.1 atalk Name trace Synopsis Screen 8-3 Ports Directory Ports Directory Commands Disable port# port#2 Screen 8-4 Service Directory Service Directory CommandsFollowing commands are available from the Service directory Top service Flush service-type service-type Manager Directory Commands Screen 8-5 Manager Directory Following commands are available from the Manager directoryTop manager Screen 8-6 Server Directory Following commands are available from the Server directory Arap Ppp Slip Asytcp Atmgr Tcpasy Lcm Config Directory Commands Top config Screen 8-7 Config Directory Name subnet Synopsis subnet LCS60 ID Software KEY Configuration Parameters Administration Typical Administrative Tasks YES LCS60 Log Level Example Change the Default Route Example System Console Configuration Parameters Following screen illustrates the summary commandsSummary Output Examples System Console Parameters- Autobaud Backup and Restore Operations # lcsadm config backup Screen 8-8 LCS60 Backup and Restore Configuration MenuLCS60 Backup and Restore Configuration Menu Generic vs. Variable Files Local and Remote Modes Backup/Restore Tape Local ModeTo Back Up to Tape Screen 8-10 Tape Backup Management Menu Screen 8-9 Backup/Restore MenuBACKUP/RESTORE Menu Tape Backup Management Menu To Restore from Tape To List the Contents of a Tape Centralized Backup/Restore Remote Mode Security Authorizing Clients and Servers Screen 8-11 Centralized Backup/Restore Menu Server Access to Backup/Restore Functions Clients ServersCentralized BACKUP/RESTORE Menu -- Server Screen 8-12 Centralized Backup Server Definition Menu Defining Backup/Restore Servers on a ClientCentralized Backup Server Definition Menu Changing a Client to a Server Screen 8-13 Centralized Backup Client Definition Menu Defining Backup/Restore Clients on the ServerCentralized Backup Client Definition Menu == mlkway/earth/brown Screen 8-14 Centralized Backup Operations Menu Backup or Restore FunctionsBackup/Restore Functions Changing a Server to a Client Centralized Backup Operations Menu -- Server Screen 8-15 Centralized Backup Operations Menu Server== backup1 From a Server == brown Restore from server example follows Screen 8-16 Tape Backup Management Menu Server Network Access Password OptionTape Backup Management Menu -- Server Creating a Tape $ telnet # useradd -u444 nap # passwd nap Changing the Network Access Password Deleting the Network Access PasswordNew password will become effective immediately Status LCS60 Status Report Error Messages Console Error Messages Error Messages from the LCS60 Fiber InterfaceHardware Error Messages When the condition has been cleared Switch. Try manually restarting the interfaceSwitch network through the CPM-HS. This condition should be Optical connection between the receiver on the Vmedkhs Server Error Messages Call Error Messages # pg /var/opt/dk/log/dksrvlog.morse Lucent Technologies Data Switch Server Log File Additional Log Files Log Files ⎜ tcplisten.log ⎜ TCP-to-Async service⎜ Log File Administration Reload System Software Installing an Upgrade on a Remote Upgrade Client Memory Dump Vmedkhs Diagnostics Connection VerificationAfter the Dump is Completed Reload System Software Unix System Software InstallationSeagate ST5660N Seagate ST11200N ?RETURN Screen 9-1 How to Enter System Responses NCD 1GB Scsi Seagate Continue with the dialogue as shown in the screen below Do not enter bo 0 Screen 9-2 UFS Utility Fixes Maintenance Tape Installation UFS Utility Fixes Tape InstallationRemove the tape once you have completed the installation # pkgadd -d /dev/rmt/ctape1 Screen 9-3 inet Package Removal Inet Package Removal# pkgrm inet Screen 9-4 LCS60 Application Software Installation LCS60 Application Software InstallationIndicates that the inet package has already been removed Important Notice System is Being Shut Down NOW # /etc/shutdown -g0 -y Unixr MP Removing the LCS60 Application Software # pkgrm lcs60 Screen 9-5 LCS60 Application Software Removal R2.0 Example # pkginfo -l lcs60p UpgradeVendor AT&T-LC Installing an Upgrade on a Remote Upgrade Client Remote Upgrade Remote Upgrade Installation Menu # pkgadd -d /var/spool/pkg ⎜ N Processor Board Firmware Update⎜ B ⎜ a ⎜ 0D Processor Board Firmware Update ⎜ Reset Local System CPU Y/N? Bugset Screen 9-6 set and env Commands Processor Diagnostics MVME197 HEX EcdmLanc Mask Vmedkhs Diagnostics CC0 rem cpm CC0 diag cpm Screen 9-7 Example diag cpm for CPM-HS Module CC0 res cpm CC0 display conn mod Diagnostic Exits Connection Verification LCS60 to Data Switch Connected Host Verification dkcu LCS60 to Local Ethernet Host Verification ping LCS60 to Data Switch Verification Loopback Test dkcuDkcu mlkway/earth/watson Dkcu mlkway/earth/morse Memory Dump Screen 9-8 Service Menu Cd /stand Echo unix ⎪ cpio -oBc /dev/rmt/ctape1 After the Dump is CompletedAt the root prompt, remove the tape from tape drive Srvtab Originating Group Security Table of Contents Issue Server Table Srvtab These fields are described below System Field ⎜ File Service Service Field⎜ hyphen Null generally login ⎜ arap Table A-1 Server Table Flags Flags Field Table A-1 User Field Table A-2 User ID Mapping Options Program Field Initial Parms Field Table A-3 Program Arguments Specification Table A-3 Server Table Scanning Rules Server Table Validation and Matching Modifications to the Server Table Appendix a Alarms to StarKeeper II NMS Configuration of the StarKeeper Table of Contents Issue Diskette or Tape Installation Configuration of the StarKeeper II NMS Hardware ForFor HP Enter /usr/bin/installpkg then enter F to install Enter i Return when you see the followingSupport for AT&T 6386 into the disk drive when instructed Then execute the following four commands At Release enter StarKeeper II NMS Configuration Commands To indicate that StarKeeper If you are ready for StarKeeper Alarms to StarKeeper II NMS Description The inetinit process is not executing Action Reboot the system cd / /etc/shutdown -y -g0 Description The tlid process is not executing L600730 Process ipxd is down StarKeeper II NMS Slip Sessions User Error Messages Table of Contents Issue Outgoing Call Error Messages Cable Error MessageAccess denied All channels busy Address too longAll trunk channels busy Auto dialer failed to initiate call. Try again Dialer error Dial to vlp errorDkserver Cant open line. Call System Administrator Could not complete your call. Try again Dkserver Cant chroot. Call System Administrator Dkserver Dksrvtab not readable. Call System AdministratorError During Call SETUP. Call System Dkserver Cant push your streams module Host protocol error Host configuration mismatch. Call Network AdministratorDkserver Call on a busy device or call collision, try again Endpoint hung up Network congestion--Call timeout. Try again Network congestion--Call forward error. Try again laterNetwork congestion--Connection error. Try again later Insufficient CIR at module No diagnostic channel Network routing errorOpen channel error Network hung up SIM no access Service mismatchReceive window too small Remote node not answering Incoming Error Messages Slip Sessions Slip is temporarily disabled Ipaserrno=error numberMissing -s %h option in dksrvtab4 slip file Ip address IP address is invalid Mtu=MTU size, must satisfy 296 = mtu = Seagate ST5660N Drive Reload System Software Unix System Software Installation Table of Contents Issue Unix System Software Installation If you have a Seagate ST11200N drive, refer to for Unix Sys Screen D-1 How to Enter System Responses Appendix D Add the following line to the file NCD See note below Return Appendix D Manual Pages Table of Contents Statlcs Telnet Table of Contents Issue Atlog -d loglevel -t enprz0 Atlog Atlog 1MAtping1M Atnetstat 1M Atnetstat Atnetstat 1M Atping -dsec net.node packetsize count Atping 1M Usr/etc/atping Usr/etc/atlog Usr/etc/atnetstat Atping Atping 1M ˜ !cmd ˜ $cmd ˜ %take from to Dkcu 1C Transmit a Break to the remote system Opt/dk/bin Directory in which this command resides˜ ˜ Send the line ˜ . . . to the remote system Dkmaint 1M Common Signaling Channel device for interfaceDkmaint r i interface c channel Opt/dk/sbin FTP FTPWwsize Allbinary Account passwdAppend local-file remote-file Debug BinaryDisconnect Macdef mname Macls mname Macdel mname Ntrans inchars outchars Nmap inpattern outpatternOpen host port Prompt Put local-file remote-file Proxy ftp-cmdQuote arg Rename remote-file new-name Runique Rstatus fileSendport Site arg Umask mask SystemVerbose Chmod1, umask1 Netrc4, services4 Broadcast addr Ifconfig Ifconfig 1MHostgroups Join addr Mtu mtu Metric nNetmask mask Netstat1 Inetinit.cf4 Ifstat Ifstat 1M Ifstat -adfstz-linterval config file cntrlr num Etc/ifstat.conf Linterval Ifstat Ifstat 1M Iftrace gdpbhrtn f diskfile i count keywords Iftrace 1MDiskfile Count Keywords Iftrace Iftrace 1M Ipxnetstat -ir dv -p rip ⎪ ipx interval Ipxnetstat 1MEtc/lcs/ipxas.cf Usr/etc/ipxnetstat Ipxping1M Ipxping networknode packetsize count interval Ipxping Ipxping 1MUsr/etc/ipxping Usr/etc/ipxnetstat Netstat -AainrsSv-p protocol interval Netstat Named1M, route1M, routed1M Hosts4, networks4, protocols4, services4 Nslookup host server nslookup server NslookupHost server Help Noaaonly Server host lserver hostNod2 Nodebug Norecurse Timeout=xRetry=x Root=host Named1M Resolver3 Named.boot4, resolv.conf4 Ping 1M Netstat1 Ifconfig1MPing -r-vhost packetsize count Pull Pull 1C Symbolic LinksPull L destination filename ... directory Long Names Multiple Interfaces Push lxho9 a/b c a/d/e /tmp/one Push Push 1CCreates files /tmp/one/b, /tmp/one/c, and /tmp/one/e, while Push lxho9 /tmp/two ! a/b D/e Symbolic Links Local machine will be used as the file modification time Route flush net⎪host Route 1M Route Route 1M Statlcs -t Statlcs 1MUsr/etc/statlcs Telnet -ec-8 host port TelnetCrmod Negotiate command option Help command ? commandEscape c Linemode Open -ec-8host port Transnvt commandOptions Telnetd4 PPP Service Examples Introduction Client Software ConfigurationSlip Service Examples Connection via Modem Arap Service Example All users Client Software Configuration Mac Connection CCL Script Client PackagesUsers with a NAC security server @ORIGINATE Screen F-1 CCL Script Example Screen F-1 CCL and Modem Hints USERID, PasswordNj/exch/system.ppp Exit Windows 95 IPX over PPP PPP Service ExamplesModem Be sure you dont have conflicts with existing label numbers PC Configuration Figure F-1 Windows 95 IPX Over PPP Example Screens Destination mlkway/earth/morse.ppp PPP Connection Screen F-2 Sample LCS60 dialup.scr Screen F-2 Figure F-3 PC/TCP Example Screens 14400 154.12.22.81 Connection InterPPP User Information Figure F-5 Network Control Panel Figure F-7 IP Address Screen Figure F-9 AppleTalk Status Window Figure F-8 PPP Connection Screen ChameleonNFS Slip Service Examples Figure F-11 Custom Setup Window Screen F-3 slip.ini File Fragment DefaultTYPE=SLIP SLIP0 TYPE=SLIP SLIP1 Connection via Modem Arap Service Example Information Figure F-15 Arap Remote Access Setup Modem Example Figure F-16 Arap Remote Access Status Screen Example User Information Report Fields General Parameters Table of Contents Issue General Glossary Internet InterfaceIP Network Network AppleTalk Network/Zone atalkas Parameters Ethernet Interface etherif SLIP/PPP Service ipas/ipx Define Service Sessions maxsessionsDNS Resolver dns TCP-to-Asynchronous Gateway Services srvports Subnetwork Configuration subnet Session Directory Report FieldsShow Arap Sesid Session ID number Show Slip Show Async/TCP Char ModeConnect Time Idle Time Show PPP Link, IP, IPX, AppleTalk Proto Comp MagicAddr Comp Peer Addr Trace Arap Trace Async/TCP Trace Slip Trace PPP Ports Directory Show ConfigurationsShow Statistics Summary Service DirectoryShow Use CfgCap Max Manager Directory Service NameServer Directory Psid # Startup Time InuseServer Name # Index Index Issue Index Authentication Async-to-TCP gateway serviceAutoboot reset Backup, 8-18,see Backup/restore Network security group, 4-3,5-3 PPP, F-2 Mac, F-1 Installation Data switchD8AH connector, 2-13,2-18 Data switch, G-1 Server log file Index Dialstrings Ifconfig, E-19 Index Login, A-3 Local backup/restoreConfiguration, F-1,F-22 Maintenance, 9-1,D-1 Example, F-13 NAC Index RS-232 connections, 2-4,2-9 to Routing IP packets SID Index Backup to How to enter, 9-2,D-2List contents Restore from Version LCS60 console connection Index