HP LCS60 manual Specifications

Site Preparation

Table 2-2:	Specifications
________________________________________________________
⎜	LCS60 Network Interface for Ethernet				⎜
_					⎜
⎜			⎜	90 to 132 VAC (47 to 63 Hz), 5 Amps
⎜ Power Requirements					⎜
⎜			⎜	180 to 250 VAC (47 to 63 Hz), 2.5 Amps	⎜
			⎜
⎜			⎜	41 to 60 VDC, 8 Amps	⎜
⎜			⎜	10 to 45°C	⎜
⎜ Operating Temperature					⎜
			⎜
⎜			⎜	−40 to 54°C	⎜
⎜ Storage Temperature					⎜
⎜			⎜		⎜
			⎜ Long-Term 20 to 55%
⎜ Operating Humidity					⎜
⎜			⎜	Short-Term 20 to 80%	⎜
⎜			⎜		⎜
			⎜ 10 to 95%
_Storage Humidity					⎜
⎜			Fiber Interface
⎜					⎜
⎜ Fiber Core Size			⎜	62.5 microns	⎜
⎜			⎜		⎜
⎜ Mode			⎜ Multi-mode		⎜
⎜			⎜		⎜
⎜ Fiber Optic Cable			⎜ FL2P-P Type		⎜
⎜			⎜		⎜
⎜ Connector			⎜ ST Type		⎜
⎜		Ethernet Interface			⎜
⎜ Interface			⎜	IEEE 802.3	⎜
⎜			⎜		⎜
⎜			⎜ Female 15-pin DB15		⎜
_Connector					⎜
⎜	Console/Terminal Interfaces
⎜					⎜
⎜ Port 1 (console)			⎜	RS-232C (limited) Asynchronous	⎜
⎜			⎜		⎜
⎜ Ports 2,3,4 (terminal)			⎜ RS-232C Asynchronous		⎜
⎜			⎜		⎜
⎜ Connectors			⎜ 25-pin DB25 (receptacle)		⎜
⎜		Serial Port Defaults			⎜
⎜ Port 1			⎜	9600 bps	⎜
⎜			⎜	9600 bps	⎜
⎜ Port 2			⎜		⎜
⎜ Port 3			⎜	9600 bps	⎜
⎜ Port 4			⎜ 1200 bps		⎜

Hardware

Issue 3 2-3