Network Access Password Option

#useradd -u444 nap

#passwd nap

New password: password

Re-enter new password: password

#

Note: The password will not echo on the screen.

The Network Access Password user ID parameters (e.g., group, uid, etc.) can be modified with the usermod command.

An example of the telnet command (with the password option set) is shown in Screen 8-17.

Screen 8-17: TCP-to-Async Gateway with Network Access Password

$ telnet 154.12.21.5

Trying 154.12.21.5 ...

Connected to 154.12.21.5.

Character mode is enabled.

Escape character is '~'.

Notice from LCS60(morse)...

The following editing characters are valid during input at prompts:

--An ASCII "backspace" erases the last character typed,

--An ASCII "@" deletes the entire input line.

Network Access Password: enter password

Notice from LCS60(morse)...

The following editing characters are valid during input at prompts:

--An ASCII "backspace" erases the last character typed,

--An ASCII "@" deletes the entire input line.

morse LCS60 DESTINATION: mlkway/earth/watson login:

Administration

Note: The Network Access Password prompt appears only if the password option is set. Echoing is turned off when the password is entered.

Issue 3

8-39

Page 223
Image 223
HP LCS60 manual # useradd -u444 nap # passwd nap, $ telnet