ARAP Service Example

Note: In order to edit the CCL script, you should have the AppleTalk Remote Access Modem Script Workshop software (contact your modem or client software vendor). The CCL documentation will indicate the supported baud rates.

User Information

Connection (via Modem)

To establish the ARAP connection, perform the following steps:

1. From the Network Control Panel of the Control Panels folder select Remote Only. (Refer to Figure F-13.)

2. Launch the Remote Access Client program and select Guest. (Refer to Figure F-14.)

3. Select Remote Access Setup under Setup on the Control Bar (Figure F-15):

—Choose Modem; select your CCL Script

—Choose Port; select modem port

—Use the defaults for all other fields

4. From the Main Screen, Figure F-14:

—Enter the phone number.

—Use the defaults for all other fields.

—Under File, select Save As to save the setup to a file name (for example, lcs60). This will allow you to launch lcs60 the next time you want to establish the ARAP connection, rather than repeating this procedure.

5. From the Main Screen (Figure F-14), select Connect to connect and display the Remote Access Status window (Figure F-16).

Note: Under Windows, select Activity Log to see log entries for the connec- tion.

F-22

Issue 3