HP LCS60 Screen F-3 slip.ini File Fragment, Default, TYPE=SLIP SLIP0, TYPE=SLIP SLIP1, Type=Slip

SLIP Service Examples

slip.ini file); refer to Screen F-3 for an example.

3. After configuring slip.ini, select "Connect" for the SLIP connection.

Screen F-3: slip.ini File Fragment

[DEFAULT]

SCRIPT=name: $u$r word: $p$r -n $6$c$r -i

TYPE=SLIP

[SLIP0]

SCRIPT=DESTINATION: $c$r -n $5

TYPE=SLIP

[SLIP1]

SCRIPT=USERID: $u$r Password: $p$r DESTINATION: $c$r -n $6 -i

TYPE=SLIP

Where (for the ChameleonNFS software):

$u sends the Chameleon user ID string as the NAC User ID

$p sends the Chameleon password as the NAC password

$c sends the Chameleon SLIP COMMAND as the data switch dialstring (in the example in Figure F-12, mlkway/earth/morse.slip)

$r sends a carriage return

-itells the script to capture the IP address

-ntells the script not to expect an incoming string $1-$9indicates the number of seconds to pause.

Note: All of the variables for the scripting language file are described in detail in the software documentation for the package you are using.

User Information

Issue 3 F-21