HP LCS60 manual Slip Service Examples, ChameleonNFS

SLIP Service Examples

ChameleonNFS 4.0

Note: ChameleonNFS 4.5 is different from ChameleonNFS 4.0. Refer to the user documentation for specific details.

Before you can make a SLIP connection using ChameleonNFS, you must config- ure the SLIP interface through Windows; Figures F-10 - F12 show an example configuration for dynamic IP address acquisition.

1. Under the Custom window, select Interface and add a SLIP interface.

Figure F-10: Custom Interface Window

2. Under the Custom Setup window (Figure F-11), configure the following:

∙ IP address (1.1.1.1 for a dynamic IP address)	∙ Port
∙ Modem	∙ Dial
∙ Login (Figure F-12)

User Name field = NAC User ID; User Password field = NAC password; Startup Command field = SLIP dialstring

User Information

Issue 3 F-19