HP LCS60 manual Initial System Setup initsetup, Top Directory Commands, Screen 8-1 Top Directory

lcsadm Interface

ˆThe ˆ is used to move back to the previous directory. Refer to Figure 8-1.

Screen 8-1: Top Directory

Top>#	Return
Commands may be abbreviated. Commands are:
config/	help	manager/	ports/	quit
service/	session/	start	stop	^
!

Top># manager

Top>Manager># ^

Top>#

Note in Screen 8-1 that the Top directory is available from the Manager directory either by entering ˆ or top.

Initial System Setup (initsetup)

The system must be initialized before it can be used. To initialize and configure the system before it is used the first time, the system administrator must log on as root and run the initial setup procedures described in Chapter 3.

Top Directory Commands

Once you log onto the LCS60, the Top> prompt is displayed. This indicates you are in the LCS60 Top Directory. To display the options available from this direc- tory, use the Return key as shown in Screen 8-1.

Note: The directories appear on the screens followed by a slash "/".

Top is the initial directory entered when the lcsadm program is invoked. All other directories are accessible from the Top directory by entering the directory name. In addition to the common commands described previously, the following commands are available from the Top directory.

Administration

Issue 3 8-5