GE 0150-0193G Main Menu → Alarms → Videoloss Action, Main Menu → Alarms → Pre Alarm Duration

qMain Menu → Alarms → Videoloss Action

Use this menu to configure how the unit responds to videoloss.

Camera: Select the camera you wish to configure.

Relay 1: If enabled, the unit will activate Relay 1 when videoloss is detected.

Relay 2: If enabled, the unit will activate Relay 2 when videoloss is detected.

Buzzer: Use this setting to disable the videoloss buzzer activation on a per camera basis. To disable videoloss buzzer activation on all cameras go to the Main Menu → Alarms → Buzzer Setup menu, described in the previous section.

Videoloss Action

Camera :		01
Relay	1:	Disable
Relay	2:	Enable
Buzzer :		Enable
[CANCEL]		[OK]

qMain Menu → Alarms → Pre Alarm Duration

During recording, the unit stores up to 5 seconds of recorded information in a buffer. This data can be automatically retrieved when an alarm is activated. Select the amount of time just previous to the activation of an alarm you wish to retrieve.

Pre Alarm Duration

(Time in Seconds)

05

qMain Menu → Alarms → Notification

Use this menu to select:

Email

∙Email Alarm Notification.

TCP/IP

∙ TCP/IP Notification.

Email Notification Setup

This screen allows the user to setup the types of events to be notified of, and the email addresses (up to two) to be notified. Follow the context sensitive on-screen instructions to setup the individual fields. Also, please note that the Region/Time Zone setting must be set correctly for Email notification to time stamp messages accurately.

0150-0193G 45 DVMRe Triplex