GE 0150-0193G manual Unpacking, Installation Environment, Ten and Sixteen-Channel Units

Ten and Sixteen-Channel Units

Password	Access	Function	Changeable		Default
Type	Level		by user?		Password
Operator	Operator	Provides access to the Operator	Yes		Press ‘ENTER’
		and SystemView menus.			4 Times
Installer	Installer	Provides access to all on-screen	Yes	3 4 7 7
		menus.
Factory		Resets the multiplexer to the
	Installer	factory defaults (except the time,	No	8 1 1 1
Defaults		date, email addresses, and email
		IP address).
Language	Installer	Provides access to the On-screen	No	5 4 1 5
		Language menu.
Ethernet		Deactivates the ethernet
Access	Installer	password, so that the unit may be	No	1 1 1 1
		accessed by any PC equipped with
Reset
		WaveReader.

1.4 Unpacking

Check the package and contents for visible damage. If any components are damaged or missing, do not attempt to use the unit, contact the supplier immediately. If the unit must be returned, it must be shipped in the original packing box.

Package Contents

∙The DVMRe Triplex unit.

∙The Alarm Interface Circuit Board (P/N 0090-0077).

∙Accessory PCB (P/N 0900-0127). Audio equipped models only.

∙The User Manual (P/N 0150-0193).

∙A WaveReader Software CD (P/N 0151-0005-25W11).

∙The WaveReader Software Manual (P/N 0150-0143).

∙The Archiving Addendum (P/N 0150-0194).

∙WaveWatch User Manual (P/N 0150-0189).

∙Power Supply (P/N 4310-0020).

∙Power Cords (120 VAC P/N 4310-0002) and (220 VAC P/N 4310-0001).

1.5Installation Environment

Power: Ensure that the installation site’s AC power is stable and within the rated voltage of the 12 Volt DC power supply. If the site’s AC power is likely to have spikes or power dips, use power line conditioning or an Uninterruptable Power Supply (UPS).

Ventilation: Ensure that the location planned for the installation of the unit is well ventilated. Take note of the locations of the cooling vents in the unit’s enclosure, and ensure that they are not obstructed.

Temperature: Consider the unit’s operating temperature (0 to 40 °C) and non-condensing humidity specifications (10% to 80%) before choosing an installation location. Extremes of heat or cold beyond

0150-0193G 8 DVMRe Triplex