Record, Main Menu → Sequencing → Multiscreen Dwell

∙ The full screen dwell time.

The dwell time is the amount of time each camera is displayed on-screen (while sequencing) before advancing to the next camera.

qMain Menu → Sequencing → Multiscreen Dwell

Rotate the Jog to change the desired dwell time (from 1 to 30 seconds). The default is 3 seconds.

1.Press the Enter button to confirm the selection and exit the menu.

2.Press the Menu button to exit the menu without making changes.

Multiscreen Dwell

(Time in Seconds)

Fullscreen Dwell

Rotate the Jog to change the desired dwell time (from 1 to 30 seconds).

The default is 3 seconds.

(Time in Seconds)

1. Press the Enter button to confirm the selection and exit the menu.

2. Press the Menu button to exit the menu without making changes.

Use this menu to:

∙Specify the record quality: High, Medium, or Standard.

∙Specify if a camera is to be used for event recording, time-lapse recording, or both.

∙Specify the time-lapse record rate per camera.

∙Specify the event record rate per camera.

∙Specify the activity record rate per camera.

∙Specify the alarm record rate.

∙Set the Record Lock feature.

∙Perform disk maintenance by Deleting, Un-deleting, or Destroying previously recorded video.

∙Specify how the unit will handle data overwrite issues once the hard disk becomes full.

Record Quality

Event Settings

Timelapse Record Rate

Event Record Rate

Activity Record Rate

Alarm Record Rate

Record Mode

Disk Maintenance Record Lock

Auto Delete Mode

0150-0193G

DVMRe Triplex