One or more of these fields must be set to ENABLE to receive an email notification of the selected event.

Obtain the parameters for these two fields from your IT Department.

 

 

 

Email Notification Setup

 

 

Notify Vidloss:

ENABLE

 

 

 

Notify Alarm:

DISABLE

 

 

 

Notify Record:

DISABLE

 

 

 

Notify Archive:

DISABLE

 

 

 

Notify Menu Access:

DISABLE

 

 

 

Notify Power Up:

DISABLE

 

 

 

Notify Connection:

DISABLE

 

 

 

Email User 1:

john.doe

 

 

 

Email Domain 1:

somecompany.com

 

 

Email User 2:

jane.doe

 

 

 

Email Domain 2:

somecompany.com

 

 

SMTP Server:

0. 0. 0.

0

 

 

SMTP Port:

25

 

 

 

 

[CANCEL]

[OK]

 

 

 

 

 

 

 

 

 

 

Format of email address: user@domain

Warning: Region/Time Zone must be set correctly!

NOTE

Only if Notify Alarm is set to enable will the email include a link to the video on the disk. The link pertains only to the alarm start. For more information see section 6.2.

Email Address Format

The format of the email addresses should be entered as follows. If the email address to be notified is john.doe@somecompany.com, then john.doe should be entered in one of the Email User fields and somecompany.com should be entered in the subsequent Email Domain field.

TCP/IP Notification Setup

This screen allows the user to setup the types of events to be notified of, and the IP addresses (up to two) of the PC(s) where the WaveReader software resides.

WaveReader must be running on the receiving PC(s) and Alarm Monitoring must be setup. See Alarm Monitoring in the WaveReader Manual for details.

0150-0193G

46

DVMRe Triplex

Page 46
Image 46
GE 0150-0193G manual TCP/IP Notification Setup, Enable