700 Series Managed Switch User’s Guide for Software v2.1
Priority
Use the priority command to set the STP priority
Syntax
FSM726(config)#
Where
<priority> = is the STP priority. This number ranges from 0 – 65535.
System
The system command configures important system items such as IP addresses, password security, and firmware upgrade.
Config-TFTP
The
Syntax
FSM726(config)# system
Where
[save load] = Choose save if you wish to save your configuration file to the TFTP server, load if you wish to load the configuration file from the TFTP server.
<IP address> = the IP of the TFTP server where the configuration file is stored (if you are loading a configuration file from the TFTP server) or destined for (if you are saving your configuration file to the TFTP server).
<path & filename> = The path and file name of the configuration file
config-tftp ip
The
Syntax
Command Line Interface |
