700 Series Managed Switch User’s Guide for Software v2.1

Use the no command to disable mirror.

Negotiation

This command lets you enable speed and duplex auto-negotiation.

Syntax

FSM726(config-if)# negotiation auto

No

The No command negates one of your previously given commands.

Syntax

FSM726(config-if)# no <commands>

Where

<command> = the command which you wish to negate.

For example, suppose you previously turned on flow control on this particular interface by using the flow-ctrlcommand, and you changed your mind and wish to turn it off. The command to do so would be

no flow-ctrl

Another example:

Suppose you have configured this particular interface to e a mirror source with the mirror source command. To disable the port as a port mirror, use the no mirror source command.

Type

The type command let you select whether to use the RJ-45 interface or the GBIC interface on your gigabit ports (port 25 & 26). If a GBIC module is present, you may wish to use gbic mode; however, if no GBIC module is present, the switch defaults to the RJ-45, also known as twisted-pair (TP).

Syntax

FSM726(config-if)# type <interface type>

6-16

Command Line Interface

SM-10004-02

Page 106
Image 106
NETGEAR 700 Series manual Negotiation, Type