NETGEAR 700 Series manual Set-up Gbic, Setup Gbic

	700 Series Managed Switch User’s Guide for Software v2.1
• Flow Control:	Indicates whether Flow Control support is set for automatic (Auto) or off
	(Disabled)

Set-up> GBIC

This page allows the user to choose the port type for the gigabit ports. The default is 1000BASE-T (RJ-45).

Figure 5-15: Setup: GBIC

If you want to use a GBIC, the setting on this page must be set accordingly. The switch auto-detects if the media is copper or GBIC. This Auto-detect feature is enabled by default.

Note: Enabling the GBIC connector for a Gigabit Ethernet port disables the built-in 1000BASE-T port.

Web-Based Management Interface 5-15

SM-10004-02