700 Series Managed Switch User’s Guide for Software v2.1

FSM726(config)# system config-tftp ip <IP address>

Where

<IP address> = the IP address of the TFTP server.

Config-tftp Path/File

The config-tftp path/file command lets you configure the path and the filename of the configuration file to be loaded/saved.

Syntax

FSM726(config)# system config-tftp path/file <path&filename>

Where

<path&filename> = the path and the filename of the file

IP

The IP command lets you set the IP address of the switch.

Syntax

FSM726(config)# system ip <IP address>

Where

<IP address> = the IP address of the switch.

IP-Filter

The purpose of IP filtering is to prevent unauthorized personnel from gaining access to the switch. This is accomplished by allowing only certain IP addresses to be able to access the management. This command enables IP filtering on the switch. The No command will disable it.

Syntax

FSM726(config)# system ip-filter

6-26

Command Line Interface

SM-10004-02

Page 116
Image 116
NETGEAR 700 Series manual Config-tftp Path/File, IP-Filter