700 Series Managed Switch User’s Guide for Software v2.1

<IP Address> = the IP address of the destination host

Exit

The exit command moves you up one level in the CLI structure. For example, when you are in configuration mode, and the prompt looks like FSM726(config)#. By entering exit at the prompt, you will exit the configuration mode and be taken back to the root level, where the prompt looks like FSM726#. When you enter the exit command at the root level, you will return to the CMI.

Syntax

FSM726# exit

Show

You can use the show command to view system configuration. The information that can be shown falls into the following categories:

DiffServ – DiffServ settings

Interfaces – Interface status & configuration

IP – IP information

Mac-address-table – the MAC address table and other related items, such as aging timers and static addresses

Mirror – Mirroring settings

Multimedia – IGMP settings

Running Config – Current operating configuration

SNMP – SNMP related information

Spanning-Tree – the Spanning Tree topology

System – System-related settings

Trunking – Trunking information

VLAN – VLAN information

DiffServ

Use the show diffserv command to view the priority associated with each DSCP value.

Syntax

Command Line Interface

6-3

SM-10004-02

Page 93
Image 93
NETGEAR 700 Series manual Exit, Show, DiffServ