700 Series Managed Switch User’s Guide for Software v2.1
Community
You can create up to eight different community strings with combinations of privileges. These community strings need to be set prior to setting host access, as the host table depends on the existence of community strings
Syntax.
FSM726(config)# snmp server community <name> [ro rw wo trap]
Where
<name> = the name of the community
[ro rw wo trap] = the privilege associated with this community.
ro = read only.
rw =
Contact
You can use the contact command to specify contact information for the switch.
Syntax
FSM726(config)#
Where
<contact info> = the contact information associated with this switch.
Location
You can use the location command to describe the location of the switch.
Syntax
FSM726(config)#
Where
<location info> = the location of this switch.
Command Line Interface |
