700 Series Managed Switch User’s Guide for Software v2.1

Where

<interface type> = Options for this field include gbic and tp.

Shutdown

The shutdown command let you shutdown this particular interface. You can reverse this command by using the no shutdown command.

Syntax

FSM726(config-if)# Shutdown

Spanning Tree

The spanning-treecommand lets you configure the variables of the port that affects its spanning-tree operation, items such as port cost and priority is configured through this command.

Syntax

FSM726(config-if)# spanning-tree [cost <1-65535> port-priority <0-255> fastlink ]

Where

Cost <1-65535>= the cost of the port, ranges from 1-65535 port-priority<0-255>= the priority of the port, ranges from 0-255

fastlink = enables Fastlink, a mode that bypasses the listening & learning phase of Spanning Tree

Speed

Syntax

FSM726(config-if)# speed <speed>

Where

<speed> = the speed of the port. The options are 10, 100, 1000, or auto (for automatic speed configuration).

Command Line Interface

6-17

SM-10004-02

Page 107
Image 107
NETGEAR 700 Series manual Shutdown, Spanning Tree, Speed