700 Series Managed Switch User’s Guide for Software v2.1

Click Apply.

Add a port to a VLAN Group

Under the ‘Show VLAN’ drop down menu, select the VLAN you want to edit.

Click the box below the port number on the line of the VLAN so that a ‘T’ (tagged) or ‘U’ (untagged) appears.

Click Apply.

Remove a port from a VLAN Group

Click the box again until a blank box appears. This will remove VLAN membership from the port.

Click Apply.

Advanced> VLAN> VLAN Port

Figure 5-33: VLAN Port Settings

All untagged packets entering the switch will by default be tagged with the ID specified by the port’s PVID. This screen allows you to specify the PVID for each port. The number next to each port indicates which PVID is set for each port. Following industry standards, PVID 1 is the default PVID.

5-32

Web-Based Management Interface

SM-10004-02

Page 82
Image 82
NETGEAR 700 Series manual Advanced Vlan Vlan Port, Vlan Port Settings