Sun Microsystems SG-XPCIE20FC-NEM-Z manual 2Inserting the NEM Into the Chassis

FIGURE 2-2Inserting the NEM Into the Chassis

7.Push the ejector levers toward each other and close the levers to secure the NEM in its slot.

After you physically install the NEM in its slot, the Chassis Monitoring Module (CMM) will automatically detect the presence of the NEM. The OK LED goes to Standby blink (see TABLE 2-3for LED status).

8.Press the Attention button to notify the blades (host operating systems) of the presence of the NEM.

9.Verify that the NEM is working properly. See “To Verify NEM Status” on page 17.

Chapter 2 Hardware Installation and Removal 11