3.Follow the instructions in the README file to build and install the 8.0.16.27 driver.

Driver Software for Windows 2003 OS

The HBA driver for Windows 2003 OS is available for download at the Emulex support site for Sun Microsystems.

http://www.emulex.com/sun/support/nem-e11000.jsp

To Install Windows OS Driver and Application Kits

Follow these steps to download the driver and AutoPilot installer:

1. Go to the Emulex support site for Sun Microsystems at:

http://www.emulex.com/sun/support/nem-e11000.jsp

2.Locate the driver section for Windows.

3.Download the Driver Kit by clicking the Download icon.

4.Click the PDF Manual icon to download installation, configuration, and troubleshooting information for the Windows OS.

5.Install the driver and management utilities for the Windows OS as described in the Emulex installation guide you downloaded in the previous step.

Configuration and Diagnostic Utilities

Use the HBAnywhere Remote Management Utility or the lputil command-line interface (CLI) utility to configure the HBA. These utilities are available for Linux and the Windows OS and provide support for the following functions:

Discover local and remote hosts, HBAs, targets, and LUNs

Reset HBAs

Set HBA driver parameters

Update firmware

26 Sun StorageTek 4 Gb FC NEM 20-Port Host Bus Adapter User’s Guide • February 2008

Page 42
Image 42
Sun Microsystems SG-XPCIE20FC-NEM-Z manual Driver Software for Windows 2003 OS, Configuration and Diagnostic Utilities