VGA Monitor and individual PS2 Keyboard and mouse
Power on the Monitor
Power on the KVM switch
A boot sequence will be displayed confirming the KVM switch is ready for use. Port 1 on the KMV switch will have the ‘select’ LED illuminated.
Note:
Some CRT Monitors may not react quickly enough to display the boot sequence and the screen will appear blank. If this happens, note whether the Port 1 LED is lit and press and release the Left Control key (Ctrl) followed, within 2 seconds, by the “F12” function key. The On Screen Display menu should then appear confirming the KMV is active and communicating.
Quick Installation Guide | Rev. 1.1 |
