Recipes continued

Fried Mozzarella Sticks

185g Mozzarella cheese

2 tablespoons milk ¼ cup plain flour

1 egg, lightly beaten

1 cup Japanese breadcrumbs

sea salt and freshly ground black pepper 1 ½ cups Italian tomato sauce

1.Cut Mozzarella into 1½ cm thick sticks.

2.Dip the sticks into the milk then flour; shake off excess.

3.Dip sticks into the egg then coat into the flour seasoned with salt and pepper.

4.Place coated sticks onto a tray and place into the freezer for about 25 minutes.

5.Heat oil to 170°C. Deep fry for about 30 seconds or until the crumbs are golden; drain on absorbent paper.

6.Serve with warmed tomato sauce.

Note: Japanese breadcrumbs are available from Asian grocers or good supermarkets.

Green onion and sesame puffs

1 tablespoon vegetable oil

1 teaspoon fresh grated ginger

1 clove garlic crushed

12 green onions, sliced ½ cup sesame seeds

2 tablespoon oyster sauce

2 sheets ready rolled shortcrust pastry

1 egg yolk, beaten extra sesame seeds

1.Heat oil in a wok, add ginger, garlic, onions and sesame seeds. Stir fry for 1 minute, add oyster sauce. Remove from heat set aside to cool.

2.Cut 8 – 2cm (squares) from pastry sheets.

3.Place a tablespoon of onion mixture into each square, glaze edges with egg. Bring the four corners to the centre and pinch edges to seal.

4.Glaze with remaining egg and sprinkle lightly with extra sesame seeds.

5.Heat oil to 180ºC and fry till golden brown, about 4 minutes.

Meat fritters

Makes 12 fritters

1 cup self raising flour

 

salt and pepper

 

1 egg

 

2 tablespoons oil

 

¼ cup water

 

½ – ¾ cup milk

 

2 cups cooked, diced leftover meat (beef, pork, lamb, chicken)

1 onion, chopped finely

1.Place the flour, salt and pepper into a small mixing bowl. Add egg, oil and water, mix till smooth.

2.Beat in milk as required to form a loose batter. Add meat and onion.

3.Heat oil to 160ºC. Spoon batter into the hot oil. Cook until golden brown, about 5 minutes.

4.Drain and serve with reheated leftover gravy.

19

Page 20 Page 22
Page 21
Image 21
Sunbeam 4.0L manual Fried Mozzarella Sticks, Green onion and sesame puffs, Meat fritters
Page 20 Page 22

4.0L specifications

The Sunbeam 4.0L engine has garnered attention for its blend of performance, efficiency, and modern technology, making it a compelling choice for various applications, particularly in automotive and industrial sectors. As a part of the legacy of Sunbeam engineering, this engine represents a commitment to delivering powerful performance while minimizing environmental impact.

One of the standout features of the Sunbeam 4.0L engine is its design, which utilizes an aluminum alloy block and cylinder head. This lightweight construction not only contributes to overall vehicle weight reduction but also enhances thermal efficiency, allowing the engine to operate at optimal temperatures for extended durations. Coupled with a DOHC (dual overhead cam) configuration, the 4.0L engine achieves improved airflow, allowing for better combustion and increased power output.

The Sunbeam 4.0L is equipped with advanced fuel injection technology, which includes direct injection systems. This technology ensures precise fuel delivery, improving combustion efficiency and throttle response, ultimately translating to enhanced horsepower and torque across a wide RPM range. This engine also features variable valve timing, enabling it to adjust the timing of the intake and exhaust valves according to engine speed and load, ensuring that performance is optimized in both low and high-speed conditions.

Another remarkable characteristic of the Sunbeam 4.0L engine is its thoughtful integration of modern electronics. With an advanced engine control unit (ECU), the engine benefits from real-time data processing, allowing it to optimize performance based on driving conditions. This adaptability not only boosts performance but also contributes to lower emissions, aligning with contemporary environmental standards.

The Sunbeam 4.0L engine balances its performance capabilities with a focus on fuel economy. Through its engineering, the engine manages to deliver competitive fuel consumption figures, making it an attractive option for those looking to reduce operational costs without sacrificing power.

In conclusion, the Sunbeam 4.0L engine exemplifies a well-rounded approach to modern engine design, blending advanced materials, cutting-edge technologies, and a commitment to performance and efficiency. Whether in a passenger vehicle or an industrial application, the 4.0L engine stands out as a testament to the innovation driven by Sunbeam’s engineering philosophy. Its features and characteristics make it a compelling choice for both enthusiasts and practical users alike.
Top Page Image Contents