Using your Stainless Deep Fryer

Before using your Stainless Deep Fryer

1.This appliance is designed for household and indoor use only.

2.Before using for the first time, follow the cleaning instructions on page 11 and clean the fryer and basket.

Note: All parts must be dried thoroughly.

3.Place the fryer on a flat and stable surface away from any heating source and where it cannot be splashed with water.

4.Use the carrying handles when moving the product, never carry the appliance by the lid.

Filling your Stainless Deep Fryer

Note: Do not connect the fryer to the electricity supply if there is no oil or fat in the tank.

1.Remove the lid and take out the frying basket. Pull the handle backwards until the handle locks into position .

Note: Do not mix different types of oil.

3.Lower the basket into the oil.

4.Replace the lid of the fryer.

5.Insert the plug into a 230 - 240 volt power outlet and turn the power on by using the on/off switch.

6.Rotate the temperature control knob to the temperature that you wish to cook the food. The red indicator light will turn on and the heating element will begin heating the oil.

Safety Feature of the thermostat

Your stainless deep fryer is equipped with a safety thermostat that switches your fryer off in case of overheating.

This will be activated when the desired temperature of the oil is reached, the red indicator light will turn off and the power supplied to the heating element is automatically cut off. The fryer is now ready to cook. When the oil temperature drops, the heating element will switch on automatically.

This may also occur if there is no (or too little) oil in the tank. If the thermostat has switched the fryer off, allow your fryer to cool down and carefully press the reset button on the front of the unit on the left hand side .

2.Pour good quality vegetable, nut or seed oil into the oil tank until it reaches between the ‘MIN’ and ‘MAX’ marks indicated

on the inside of the stainless steel tank. Never operate the fryer without oil or with insufficient oil in the tank.

17

01

09

190

 

 

07

temp

ON

 

Control

OFF

Power Ready

30

0 5

Timer

2 5

2 0

51

0 1

6

Page 8
Image 8
Sunbeam 4.0L Using your Stainless Deep Fryer, Before using your Stainless Deep Fryer, Filling your Stainless Deep Fryer

4.0L specifications

The Sunbeam 4.0L engine has garnered attention for its blend of performance, efficiency, and modern technology, making it a compelling choice for various applications, particularly in automotive and industrial sectors. As a part of the legacy of Sunbeam engineering, this engine represents a commitment to delivering powerful performance while minimizing environmental impact.

One of the standout features of the Sunbeam 4.0L engine is its design, which utilizes an aluminum alloy block and cylinder head. This lightweight construction not only contributes to overall vehicle weight reduction but also enhances thermal efficiency, allowing the engine to operate at optimal temperatures for extended durations. Coupled with a DOHC (dual overhead cam) configuration, the 4.0L engine achieves improved airflow, allowing for better combustion and increased power output.

The Sunbeam 4.0L is equipped with advanced fuel injection technology, which includes direct injection systems. This technology ensures precise fuel delivery, improving combustion efficiency and throttle response, ultimately translating to enhanced horsepower and torque across a wide RPM range. This engine also features variable valve timing, enabling it to adjust the timing of the intake and exhaust valves according to engine speed and load, ensuring that performance is optimized in both low and high-speed conditions.

Another remarkable characteristic of the Sunbeam 4.0L engine is its thoughtful integration of modern electronics. With an advanced engine control unit (ECU), the engine benefits from real-time data processing, allowing it to optimize performance based on driving conditions. This adaptability not only boosts performance but also contributes to lower emissions, aligning with contemporary environmental standards.

The Sunbeam 4.0L engine balances its performance capabilities with a focus on fuel economy. Through its engineering, the engine manages to deliver competitive fuel consumption figures, making it an attractive option for those looking to reduce operational costs without sacrificing power.

In conclusion, the Sunbeam 4.0L engine exemplifies a well-rounded approach to modern engine design, blending advanced materials, cutting-edge technologies, and a commitment to performance and efficiency. Whether in a passenger vehicle or an industrial application, the 4.0L engine stands out as a testament to the innovation driven by Sunbeam’s engineering philosophy. Its features and characteristics make it a compelling choice for both enthusiasts and practical users alike.