Sunbeam GL8200 manual Before using your Gelateria

Models: GL8200

1 28
Download 28 pages 31.79 Kb
Page 7
Image 7

Before using your Gelateria

Important: Place the Gelateria upright on a flat surface for at least 12 hours before using it for the first time, to allow the oil contained in the compressor to settle. The same procedure should be followed in the event that the ice-cream maker has been accidentally placed in a non-upright position.

1.Before use, thoroughly wash all parts that will come into contact with the ice- cream. The fixed stainless steel cylinder should be cleaned using a damp cloth and dried thoroughly. The removable cylinder, transparent lid with pouring hole and paddle should be washed in warm soapy water, rinsed and dried thoroughly.

2.When your Ice-Cream Maker is first used, you may experience an odour and possibly a slight wisp of smoke from the appliance. This is released by the insulation material of the motor when the appliance is heated, which protects the motor and is a normal occurrence. After the first few uses, this will no longer occur.

5

Page 7
Image 7
Sunbeam GL8200 manual Before using your Gelateria