Care and Cleaning.
IMPORTANT: Do not use metal utensils as these will scratch the
Do not leave plastic utensils in contact with hotplate while cooking.
Before cleaning, turn the power OFF then REMOVE the plug from the power outlet and the Heat Control Probe from the socket of the Sizzling Grill.
A bottle brush may be used to clean the drainage hole in the ribbed hotplate.
The hotplate and drip tray are also dishwasher safe.
Do not use abrasives or metal scourers as they will scratch the
Heat Control Probe.
If cleaning is necessary, wipe over with a damp cloth.
Do not immerse the control probe in water or any other liquid.
NEVER use the Sizzling Grill Heat Control Probe in any other Sunbeam appliance.
Storage
Store the probe carefully in a safe place. Do not knock or drop it as this can damage the probe. If damage is suspected, return the control probe to your nearest Sunbeam Service Centre for inspection. Refer to the back of your instruction book for Service Centre listings.
Splatter Guard.
Wash the splatter guard in warm soapy water using a mild household detergent and soft washing sponge.
We do not recommend the splatter guard is cleaned in the dishwasher.
Moulded Base.
The base can be wiped over with a damp cloth or washed in warm soapy water using a mild household detergent and a soft washing sponge.
Do not use abrasives or metal scourers as they may scratch the base.
The moulded base is also dishwasher safe.
Storage.
Always dry and assemble the Sizzling Grill before storing. Ensure the drip tray and hotplate are correctly positioned.
Store the assembled Sizzling Grill on a flat surface on your benchtop or cupboard.
Important:
Before inserting Heat Control Probe in probe socket ensure the interior of the socket is fully dry. To do this wipe interior of socket with a dry cloth or shake out excess water vigorously.
Grillplate and Drip Tray.
The element in the hotplate is totally sealed, so it is safe to fully immerse in water. Wash the hotplate and drip tray in warm soapy water using a mild household detergent and a soft washing sponge.
Sunbeam is a Registered trademark. Made in China. Due to minor changes in design or otherwise, the product you buy may differ from the one shown in this booklet. Approved by the appropriate Electrical Regulatory Authorities. Backed by Sunbeam’s 12 Month Replacement Guarantee and National Service Network.
© Copyright. SUNBEAM CORPORATION LIMITED 2001. (INCORPORATED IN N.S.W.) A.C.N. 000 006 771
For more information or advice on any Sunbeam products, contact the Sunbeam Consumer Service Line on 1800 025 059 in Australia. In New Zealand - contact the Sunbeam Office in Auckland on 09 912 0747.
