Using your StickMaster
Important: Ensure that the stick mixer is unplugged from the power outlet before assembling or removing attachments.
1.Insert the motor housing into the hole on the top of the shaft until you hear a click. See figure 1.
Figure 1
Note: All stick mixers are designed to operate only when the power buttons remain depressed.
4.For an extra boost of power during operation, the turbo speed button (II) may be depressed (for model SM8650).
Note: The power button (I) should be released when selecting turbo speed.
5.To stop the stick mixer, take your finger off the power button or the turbo speed button (for model SM8650).
6.To detach the shaft, push the buttons at either side of the base of the motor housing until the two pieces separate. See Figure 2.
Figure 2
2.Plug the power cord into a
3.Lower the stick mixer into food and depress the power button (I) or (II) at the top of the motor housing. Setting (I) is low speed and setting (II) is high speed (for models SM6200 and SM6400).
Or, with your StickMaster Pro (SM8650), you can select the optimal speed for the processing task, by turning the speed control dial from 1 to 5 and then depressing the power button (I). Speed one on the speed control dial is the slowest and speed five is the fastest.
8
