Sunbeam Using the whisk attachment Models SM6400 and SM8650, Using your StickMaster continued

Using your StickMaster continued

Using the whisk attachment (Models SM6400 and SM8650)

1.Insert the whisk attachment onto the base of the motor housing until you hear a click. See Figure 5

Note: All stick mixers are designed to operate only whilst the power buttons remain depressed.

4.For an extra boost of power during operation, the turbo speed button (II) may be depressed (for model SM8650).

Note: The power button (I) should be released when selecting the turbo speed button (II).

5.To stop the StickMaster, take your finger off the power button or the turbo speed button (for model SM8650).

6.To detach the whisk attachment, push the buttons at either side of the base of the motor housing until the two pieces separate. See Figure 6.

Figure 5

2.Plug the power cord into a 230-240 volt power outlet and turn the power on.

3.Holding the stick mixer, lower the whisk into food and depress the power button

(I) or (II) at the top of the motor housing.	Figure 6
Setting (I) is slow speed and setting (II)
is high speed (for models SM6200 and
SM6400.

Or, with your StickMaster Pro (SM8650) you can select the optimal speed for whisking by gradually increasing the speed control dial from 1 to 5, or as desired, and then depressing the power button (I). Speed one on the speed control dial is the

10slowest and speed five is the fastest.